PRODUCTS

BTMSEAL PU 1000

BTMSEAL PU 1000 is, elastomeric, polyurethane based, flexible waterproofing coating material for vertical and horizontal surfaces. After application, seamless, durable and creates a structure capable of bridging cracks. Elastomeric property by reason of the performance remains the same even at low temperatures.

ADVANTAGES

• Elastomeric

• Easy to apply

• Silk gloss appearance

• High adherence strength 

• Chemical Resistance 

• Flexibilite


PLACES OF USE
  • Mineral based surfaces,
  • Cement based sheets surfaces 
  • Under tile waterproofing applications.

SURFACE PREPARATION

Application surface, dust, loose parts, such as anti-stick material be free of oil is required. Successful application, the correct surface preparation and can be achieved by using the right materials.

• The surfaces of dust and waste with the help of an electric vacuum cleaner should be cleaned thoroughly.

• The surface damage should be repaired with a suitable repair material.

• The surface must be mechanically roughened.

• Repairs have been completed roughened surfaces should be primed with BTMSEAL AA 0106(for dry surfaces) or BTMSEAL AW 6075(for wet surfaces)


APPLICATION

Application tools: Brush, roller or airless sprey

After the application all tools must be clean with PU Thinner immediately. 

• BTMSEAL PU 1000 should be applied with brush, roller or airless spray in two layers. 

• The second coat of the first coat as the cross, after the first layer formed on the walkability (12-24 hours depending on weather conditions) should be applied.

• Each application should be maximum 1 mm.


 CONSUMPTION

 1,4 – 2,0 Kg/m² (according to the surface condition)


PACKAGING

20 Kg. Bucket


STORAGE CONDITION AND SHELFLIFE

Store in dry conditions in original packaging at temperatures between +5°C and +30°C. Protect from direct sunlight and frost. Unopened packaging at leaset 9 month.


 WARNINGS

• Opened packages should be completely finished.

• After curing, BTMSEAL P 1000 is completely healthy.

Application, using protective gloves, should be done in well-ventilated places.

Materials in contact with the skin or eyes immediately with plenty of water and / or should be washed with soap.

For more information please apply to our technical department.


adres_2BTM Bitümlü Tecrit Maddeleri Sanayi ve Ticaret A.Ş. Kemalpaşa O.S.B. Mahallesi Gazi Bulvarı No:152 35730 Kemalpaşa/İzmir TURKEY Phone:+90 232 877 04 02 Fax:+90 232 877 04 10  info@btm.co • www.btm.co


DECLARATION OF PERFORMANCE
QUALITY CERTIFICATES
HBIx5