PRODUCTS

BTM Green High Vapor Permeability Separator 90 gr/m2

It is used as a separator layer in green roof areas (resolved as an inverted roof) under the drainage plate and on the thermal insulation board XPS to ensure rapid evaporation of water and to prevent condensation.

ADVANTAGES
  • As it is an nonrecycle material, it continues to act as a separating layer throughout the life of the building.
  • It is long lasting
  • Incorruptible
  • Inseparable

PLACES OF USE
  • Green roofs
  • Landscape areas
  • Trees etc.
  • It is used to wrap around the roots of plants.

SURFACE PREPARATION

The XPS surface must be laid, dry and clean.


APPLICATION

It is laid by overlapping each other with a minimum of 10-15 cm from the transverse and longitudinal joints.


PACKAGING

It is in the form of rolls of 420 m2. Width:2,10m Length:200m


STORAGE CONDITION AND SHELFLIFE

It should be stored indoors out of sunlight.


adres_2BTM Bitümlü Tecrit Maddeleri Sanayi ve Ticaret A.Ş. Kemalpaşa O.S.B. Mahallesi Gazi Bulvarı No:152 35730 Kemalpaşa/İzmir TURKEY Phone:+90 232 877 04 02 Fax:+90 232 877 04 10  info@btm.co • www.btm.co


kMR86