Used for waterproofing purposes underneath the roof covering materials (roof tiles, etc.) on sloping roofs.
Surface on which application shall be carried out must be cleaned of any dust, dirt, rust and grease and any loose parts scraped.
Under-tile membranes nailed with clouts on the covering board parallel to the gutter direction, starting from the lowest level must be overlapped 10cm as one goes upward and the whole surface must be covered in this way.
KCF 2000 is launched into the market in rolls 1m wide and 10m long.
The membrane rolls should be stored vertically under a roof, protected from direct sunlight. If the rolls have to be stored outdoors for a long period of time, they must be covered with a protective layer in order to protect them from the sunlight. The membrane rolls or pallets should not be stacked on each other.